Showing posts with label Jeans. Show all posts
Showing posts with label Jeans. Show all posts

Saturday, 14 February 2015

Jeans! a learning journey

I am on a crusade to find / create the perfect fitting jean pattern that I can then use to make a whole draw full of jeans, cause in my opinion you can't beat a great pair of jeans!

I have only ever sewn jeans using the Jalie 2908 pattern.  There has been something about the crotch of the Jalie that I haven't been able to figure out, so I've got three new jean patterns to try so I can try and work out what I like or don't like about the fit of each and then produce 'THE' jean pattern for me.

First up is the mostly recent release, the Ginger Jean by Closet Case Patterns.  I had been stalking other blogs, to get a heads up on anything to watch out for.  But as other blogs have indicated the pattern is well drafted and the instructions are thorough.  So let's take a look at the final result ... I made view A: low rise with stovepipe leg.

Ginger Jeans v1

First impressions: I think they fit reasonably well and don't look too bad for a first attempt of the pattern.  This is my 'wearable muslin' if you like.

Ginger Jeans v1

Accordingly to my body measurements the size 12 was the fit for me, so a size 12 is what I cut. The pattern recommends that you baste the pieces together for a fit test to see if any adjustments need to be made before spending hours constructing only to find that they don't fit.  Just as well I did because I was swimming in denim.  The pattern recommends stretch denim with at least 2% lycra, which is exactly the fabric I used, so I thought that there would be a little negative ease to account for the lycra, but that doesn't appear to be the case.

I unpicked all the basting stitches and reduced the pattern pieces to a size 10.  I basted them together again for another fit test.  Much better, just small tweaks to make this time. The one I expected was the "too much fabric under the butt" scenario (which I now have a fix for), too much fabric around the knee and too tight around the calf.

To fix the problem I have with excess fabric under the butt I created a crescent leg, which is a fitting technique I learned from Kathy Ruddy, teacher of the Craftsy course 'One Pant, Many Looks'. The crescent leg is her term for something she discover one day and it involves removing a crescent shape from the side seam of the back pattern piece at the butt, therefore reducing the amount of fabric around the leg in this area.

I immediately knew that this would work, because when I was sewing up the Peter & the Wolf Pant by PaperCut Patterns I noticed the slightly strange shape of the side back pattern piece.  This is the shape created when the crescent technique is applied.  My Peter & the Wolf Pant are a good fit and I didn't have any excess butt fabric to worry about with that pattern.

Once cut the leg looks like this ...

Crescent leg adjustment

Then I decided that the excess fabric at the knee and the additional room required for my calf could be solved by using the same crescent or reverse crescent technique in the knee and calf areas, but this time I would apply this to both the back and front pattern pieces.  The side seam of the back pattern piece now looks like a windy road!

Ginger Jeans
The pink line shows the reduction at the knee flowing down to the full calf adjustment
The crescent at the butt came in by 1/4", the crescent at the knee was 1/8" on both pattern pieces so 1/4" in total and the reverse crescent at the knee came out by 1/4" on both pattern pieces so 1/2" in total. 

The jean looks more like a skinny fit than stove pipe now, but when I put them on my daughter said to me that the bottom of the leg (near the ankle) wasn't a skinny fit and looked weird. Personally I quite happy with it, because if I put a pair of heels on they fall nicely.  I added another 1" to the length of the pattern pieces, which has worked out perfectly for this style.

Ginger Jeans v1

I am still in love with the light grey top stitching I used on my Moss Mini, so went and bought another two spools for these jeans, together with some shinny silver rivets.

Ginger Jeans v1

As you can see these jeans have been lightly distressed, using my learnings from the Moss Mini.  I went back to Bunnings and bought a 220 grit sandpaper sponge to see that made a difference to the distressing, because it is finer.  I don't think it did, the distressing just took a little longer and more elbow grease!

Sewing jeans means that I get to play with an array of hardware rather than just the sewing machines... sandpaper, hammer, rivets!

Ginger Jeans v1

I actually finished these jeans about mid January but I wanted to wear them before drawing my final conclusion of the pattern.  We are in the middle of summer so jeans haven't been on the wardrobe rotation.  This weekend has been a bit chilly and gave me the perfect opportunity to test drive 'in real life'.  I've been wearing them with a belt which makes all the difference to the jean staying put on the body.

I prefer a low rise jean but sometimes that means hiking up the back every time I stand up.  Initially I thought that would be the case with this jeans as the top of the waist band slightly stretched during sewing, but I was wrong!  Next time, I might take a small wedge out of the waist band to accentuate the curve more and provide a closer fit at the top of the waist band, as well as removing a smidge at the inner leg seam just below the crotch.

They have been most comfy to wear. The crotch curve and crotch intersection are all working in synergy and feel great - much better than the Jaile jean, in my opinion.

More photos on my Flickr -->


Monday, 30 September 2013

Taller than average

I can't described how super stoked I am to know how to make jeans.  I no longer have to put up with RTW that aren't quite long enough!

Jalie Jeans Sep2013

Back in June I made my first pair of jeans with the much loved Jalie pattern.  After wearing those jeans for a wee while I was keen to make small adjustments and try different styles.

Jalie Jeans Sep2013

Here's the list of adjustments for this pair
  • lengthen the pattern by 5"
  • narrowed the bootleg - not straight but not as flared as the pattern
  • added depth to the waistband
  • cut 1/4" off the CB yoke at the wasit only and tapered down
  • drafted a flap for the back pocket and lowered the pocket placement
  • lowered the curve of the front pockets
  • added a coin pocket to the right front pocket - which didn't work that well!
Jalie Jeans Sep2013

This is only the second time I have sewn a fly front!  It was much better than my first, but still has some improvement to do.  I might need to make a skirt with a fly front!

For the back pockets I drafted pocket flaps using the shape of the bottom of the pocket and then lined them with some cotton (received in the Winter Swap), ideal match if you ask me.  I also used the same fabric for the front pocket lining.  haha have you spotted that I am missing a button!

Jalie Jeans Sep2013

I'm calling these my high heel jeans, as I can only wear them with high heals, or a boot as in these photos.  Something I've never been able to do before - RTW can only be worn with flats because of the lack of length!!!

Jalie Jeans Sep2013

My next is a pair of skinnies :)  I made further adjustments (more like tweaks) to the pattern immediately that I finished this pair, while it was still fresh in my mind.  I got the fabric at the last Fabric Store sale ... so I'm good to go, just need a splash of time!

More photos on my Flickr -->

Friday, 28 June 2013

Goodbye RTW Jeans!

I can't believe I made jeans that actually fit!


Pants/Jeans have been on my 'must learn' list for a little while and I've been reading anything that I could find on pant fitting, but do you think I understand it - NO!  Earlier in the year I attempted a New Look pattern, very straight forward ... back, front, band, side zip - what a disaster! 


Thanks to the wonderful world of sewing blogs I discovered the Jalie Jean pattern - I read a number of blogs and Pattern Reviews looking for the hook, but it seemed that this pattern was fail proof ... my kinda pattern!  I placed my order and picked up some rather cheap stretch denim ($20 for 2.6m), thinking that if it all went to custard again I hadn't really spent a lot of money!


I chose the low rise option in a size u (US size 8), based on my hip measurement.  My waist isn't as small as the pattern suggests it should be for that size, but I figured that because they were low rise that wouldn't matter and I could adjust the waist band if necessary.

I selected a light weight denim so it would be easy on the sewing machine and I didn't have bulk to deal with.  The only adjustment I made to these jeans was to the leg style and length.  The pattern is a bootleg jean, I adjusted that to a straight leg and added two inches to the length.  My biggest pet hate about RTW jeans, is they just don't make them long enough for my legs.


I am super over the moon with how these jeans have sewn up.  I can't believe how easy they were to make actually.  And look, I can even wear a pair of heels with my jeans!






I'm ready to make my next pair!  I would also like to make a pair of skinny jeans, which I am thinking is just a re-shape of the leg from above the knee?

This will be my final project for Indie Pattern Month, whew!  I have completely exceeded my own expectations this month - I only planned on making one garment which was My Cordova.  That came together so quickly that I started on the Go Anywhere Dress.  I finished that last weekend and had the pleasure of wearing it this week :-)  Next on my 'to do' list were the jeans ... because they were pants I thought it would take me ages with a little frustration thrown in; how wrong was I!   Check out the other awesome projects, by talented people on the Pinterest Board