Saturday 14 February 2015

Jeans! a learning journey

I am on a crusade to find / create the perfect fitting jean pattern that I can then use to make a whole draw full of jeans, cause in my opinion you can't beat a great pair of jeans!

I have only ever sewn jeans using the Jalie 2908 pattern.  There has been something about the crotch of the Jalie that I haven't been able to figure out, so I've got three new jean patterns to try so I can try and work out what I like or don't like about the fit of each and then produce 'THE' jean pattern for me.

First up is the mostly recent release, the Ginger Jean by Closet Case Patterns.  I had been stalking other blogs, to get a heads up on anything to watch out for.  But as other blogs have indicated the pattern is well drafted and the instructions are thorough.  So let's take a look at the final result ... I made view A: low rise with stovepipe leg.

Ginger Jeans v1

First impressions: I think they fit reasonably well and don't look too bad for a first attempt of the pattern.  This is my 'wearable muslin' if you like.

Ginger Jeans v1

Accordingly to my body measurements the size 12 was the fit for me, so a size 12 is what I cut. The pattern recommends that you baste the pieces together for a fit test to see if any adjustments need to be made before spending hours constructing only to find that they don't fit.  Just as well I did because I was swimming in denim.  The pattern recommends stretch denim with at least 2% lycra, which is exactly the fabric I used, so I thought that there would be a little negative ease to account for the lycra, but that doesn't appear to be the case.

I unpicked all the basting stitches and reduced the pattern pieces to a size 10.  I basted them together again for another fit test.  Much better, just small tweaks to make this time. The one I expected was the "too much fabric under the butt" scenario (which I now have a fix for), too much fabric around the knee and too tight around the calf.

To fix the problem I have with excess fabric under the butt I created a crescent leg, which is a fitting technique I learned from Kathy Ruddy, teacher of the Craftsy course 'One Pant, Many Looks'. The crescent leg is her term for something she discover one day and it involves removing a crescent shape from the side seam of the back pattern piece at the butt, therefore reducing the amount of fabric around the leg in this area.

I immediately knew that this would work, because when I was sewing up the Peter & the Wolf Pant by PaperCut Patterns I noticed the slightly strange shape of the side back pattern piece.  This is the shape created when the crescent technique is applied.  My Peter & the Wolf Pant are a good fit and I didn't have any excess butt fabric to worry about with that pattern.

Once cut the leg looks like this ...

Crescent leg adjustment

Then I decided that the excess fabric at the knee and the additional room required for my calf could be solved by using the same crescent or reverse crescent technique in the knee and calf areas, but this time I would apply this to both the back and front pattern pieces.  The side seam of the back pattern piece now looks like a windy road!

Ginger Jeans
The pink line shows the reduction at the knee flowing down to the full calf adjustment
The crescent at the butt came in by 1/4", the crescent at the knee was 1/8" on both pattern pieces so 1/4" in total and the reverse crescent at the knee came out by 1/4" on both pattern pieces so 1/2" in total. 

The jean looks more like a skinny fit than stove pipe now, but when I put them on my daughter said to me that the bottom of the leg (near the ankle) wasn't a skinny fit and looked weird. Personally I quite happy with it, because if I put a pair of heels on they fall nicely.  I added another 1" to the length of the pattern pieces, which has worked out perfectly for this style.

Ginger Jeans v1

I am still in love with the light grey top stitching I used on my Moss Mini, so went and bought another two spools for these jeans, together with some shinny silver rivets.

Ginger Jeans v1

As you can see these jeans have been lightly distressed, using my learnings from the Moss Mini.  I went back to Bunnings and bought a 220 grit sandpaper sponge to see that made a difference to the distressing, because it is finer.  I don't think it did, the distressing just took a little longer and more elbow grease!

Sewing jeans means that I get to play with an array of hardware rather than just the sewing machines... sandpaper, hammer, rivets!

Ginger Jeans v1

I actually finished these jeans about mid January but I wanted to wear them before drawing my final conclusion of the pattern.  We are in the middle of summer so jeans haven't been on the wardrobe rotation.  This weekend has been a bit chilly and gave me the perfect opportunity to test drive 'in real life'.  I've been wearing them with a belt which makes all the difference to the jean staying put on the body.

I prefer a low rise jean but sometimes that means hiking up the back every time I stand up.  Initially I thought that would be the case with this jeans as the top of the waist band slightly stretched during sewing, but I was wrong!  Next time, I might take a small wedge out of the waist band to accentuate the curve more and provide a closer fit at the top of the waist band, as well as removing a smidge at the inner leg seam just below the crotch.

They have been most comfy to wear. The crotch curve and crotch intersection are all working in synergy and feel great - much better than the Jaile jean, in my opinion.

More photos on my Flickr -->


12 comments:

  1. They are amazing jeans! Until I read your post I thought you'd made the top and jeans were store bought.

    ReplyDelete
    Replies
    1. I did make the top about a year ago and love it, but I now consider my jeans to be a winner if they look store bought. I've done so much research on pants I finally feel as if I'm getting my head around the fit :-)

      Delete
  2. Fantabulous! And amazingly, it is 220 grit sandpaper we use to distress furniture too, and I also reckon it is a bit too fine, too much rubbing needed.
    These look awesome, like 'real' jeans, and I love the use of the nickel and grey instead of the brass and gold, a nice subversion. Great to conquer that creeping back syndrome too!

    ReplyDelete
    Replies
    1. Thanks Mrs C :-) I'm giggling to myself that sandpaper and sewing can be in the same sentence, that's awesome. But honestly those sandpaper sponges are the best thing!

      Delete
  3. These are awesome! Im still getting my courage up to make a pair of jeans!

    ReplyDelete
    Replies
    1. You should definitely start with the Ginger Jeans, the instructions are awesome - everything you need to know about sewing jeans.

      Delete
  4. Nice job! I want to try jeans too. I think you should consider making the back pockets a little smaller though. I remember going for a jeans fitting session and bought a very expensive jeans (which I still have), and the fitting consultant worried heavily about the size and placement of the back pockets to enhancing the right aspects of the derriere. Hard to say with yours, because your hands are in the pockets, but a little shorter, a little narrower? Anyway - I'm totally impressed with the job you did!

    ReplyDelete
    Replies
    1. Because I lack any substance to my derriere the key is to full the blank space with pockets and flaps and busy patterns. A bigger butt needs to minimise in this area so not to attract attention so maybe smaller pockets. I do like the shape of these pockets though, they are shaped slightly rather than being completely square. This is a great pattern if you wanted to embark on making jeans.

      Delete
  5. These look fantastic! I love the distressing you did, they look so RTW!!

    ReplyDelete
    Replies
    1. Thanks Lisa. I still feel like my distressing needs improvement but it's definitely making a difference.

      Delete
  6. I must remember this next time I am making pants. Despite the number I have made, they do still scare me.

    Your jeans look fabulous. I must try the distressing next time.

    ReplyDelete
    Replies
    1. I think jeans get easier the more you make. I think I'm less afraid of jeans than I am of making trousers.

      Delete